Der Blätterkatalog benötigt Javascript.
Bitte aktivieren Sie Javascript in Ihren Browser-Einstellungen.
The Blätterkatalog requires Javascript.
Please activate Javascript in your browser settings.
CL 01 4 50 40 10 10 4 Re v 0 4 5 Sta te 12 0 9 20 24 Würth Ireland Ltd Performance data in concrete - anchors in a redundant nonstructural system 1 in accordance with ETA-23 0659 Effective anchorage depth h ef [mm] 32 All load directions Admissible load at every angle Individual anchor without influence of the edge distance Concrete C20 25 to C50 60 s ≥ 3 h ef c ≥ 1 5 h ef Fadm [kN] 1 2 4 Admissible bending moment Madm [Nm] 1 2 9 For admissible load when exposed to fire R30 R60 R90 R120 please refer to European Technical Assessment ETA-23 0659 1 For statically indeterminate redundant nonloadbearing systems anchors in a redundant nonstructural system in accordance with EN 1992-4 The partial safety factors of the resistances γ Mregulated in the approval assessment and a partial safety factor of the actions of γ F 1 4 have been taken into account For information on combining tensile and shear loads on axial influence and the influence of the edge distance and on anchor groups please refer to the appropriate guidelines e g DIN EN 1992-4 The admissible loads per fixing point can be found in the corresponding national regulations of the EOTA member states These may be lower than the admissible load of an individual anchor Installation parameters in concrete Anchor size [mm] 6 Effective anchorage depth h ef [mm] 32 Minimum spacing s min [mm] 200 Minimum edge distance c min [mm] 150 Minimum member thickness h min [mm] 80 Nominal drill diameter d 0 [mm] 6 Diameter of cutting edges d cut ≤ [mm] 6 40 Drill hole depth h 0 ≥ [mm] 40 Through hole in the member being connected d f ≤ [mm] 7 Head diameter d h [mm] 15 Details Application Anchors in a redundant nonstructural system with approval assessment in accordance with EN 1992-4 2018 in concrete • In normal weight concrete C20 25 to C50 60 cracked and uncracked concrete • Fastenings subject to exposure to fire For fastening lightweight fixtures • Lightweight ceiling cladding and suspended ceilings metal profiles punched strips wire hangers vernier hangers wooden battens wooden slats squared timbers etc W-DN 2 zincplated steel may only be used in dry indoor conditions Suspended ceilings